Okay, of all of the 8 people who are accepted, they have all posted.

Now I will read up on all 8 posts, then I'll post again. After that, everyone may post again.

See we were working on a Toyota truck. The thing is, they always blow a head gasket on the driver-side for some reason, so you have to tear it down and replace the gasket. But for some reason, when putting the cam bolts back on, they always strip. You're only suppose to torque them so much, and our torque wrench is probably off anyway, but it ends up stripping some of them. This time 2 stripped (1 stripped on the last one). So we had to stop, go buy a tapping set, and we gotta make some new threads in the holes, which can be a pain in itself. After that, we'll finish up putting everything back together, which should go smoothly. But then we still got one other truck after that, a van which needs a new radiator, and a small car that needs a new head on it (or something, not sure about that one). In the middle of all this, I gotta cut grass and haul the trash off, as well as babysit. So I can be quite busy during this time of the year, until it gets cold again.